Related Articles How to.

1 Use bypass loppers to cut away smaller branches around outer portion of shrub. 2 Cut through thick branches deep inside of the shrub with a chainsaw. 3 Dig around base of shrub with pointed shovel. 4 Cut through roots at base of stump with a garden shrubremover.bar: Roger Cook. Aug 12, Ask This Old House landscape contractor Roger Cook helps a homeowner remove foundation shrubs that have overtaken the front of her shrubremover.barIBE to This Ol.

Aug 14, Removing Overgrown Bushes by Vehicle First of all, measure 20 inches of the plant from the soil and proceed to cut off all branches that are above that point, leaving out about five thick branches.

These five branches would provide support for the chain that would be used to remove the overgrown shrubremover.barted Reading Time: 8 mins.

Jun 01, An easy solution to remove the dirt and hence lightening the shrub or bush is to hit the soil with a garden hose or even a power washer. If you hit the soil with some water pressure the dirt will simply wash right away. You’ll be left with only the shrub or bush which can be cut up, burned, or moved to curb for disposal.

shrubremover.barted Reading Time: 5 mins.

Slowly drive the truck forward.

Dec 27, Removing Shrubs by Hand Measure 20 inches from the soil and cut off all branches above that height with sharp pruning shears or a saw, depending on. If you need a deeper ditch then it is best to dig a trough for the tension part of the chain a well.

take up tension by hand to set the chain properly and with a steady and firm pull the shrub will come free. I have removed fairly large plants with this method. Start by digging around the base of the shrub and cutting all the roots you can get at. Then lay scraps of plywood on each side of the shrub. Set a jack stand or concrete blocks on one side and set up your jack on the other. Lay a beam across them and tie the root to the beam with a shrubremover.barted Reading Time: 1 min.